Soldering is an essential technique in the manufacturing industry, especially for assembling electronic components.

In this blog, we will share our knowledge & expertise on soldering, including the types of soldering, tools required, techniques, & common mistakes to avoid.

What is Soldering?

The process of joining two or more metal parts using a filler metal. The filler metal, also known as solder, has a lower melting point than the metal parts being joined. When heated, the solder melts & flows into the joint, creating a strong bond between the metal parts. The resulting joint is permanent & conducts electricity.

3 Types of Soldering:

There are several types of soldering, including:

Soft Soldering

This is the most common type of soldering & is used to join metals with low melting points, such as tin, lead, & zinc. Soft soldering is often used in plumbing, electronics, & jewelry making.

Hard Soldering

Also known as silver soldering, hard soldering is used to join metals with high melting points, such as steel, stainless steel, & copper. Hard soldering requires a higher temperature & a stronger flux than soft soldering.


Brazing is a type of soldering that uses a filler metal with a melting point higher than 450°C. Brazing is commonly used in the automotive, aerospace, & HVAC industries.

5 Tips for Successful Soldering:

To achieve a successful soldering joint, you should follow these techniques:

Clean the metal parts thoroughly before soldering. 

Any dirt, oil, or oxide can affect the quality of the joint.

Apply flux to the joint before soldering.

Flux helps to remove any oxides & promotes the flow of solder.

Heat the metal

HEAT THE parts with the soldering iron until they reach the melting point of the solder.

Touch the solder to the joint & let it flow into the joint.

Do not apply too much solder as it can create a weak joint.


REMOVE the soldering iron & allow the joint to cool & solidify.

Common Soldering Mistakes:

Some common soldering mistakes to avoid include:

Using too much solder

which can create a weak joint or cause the joint to become brittle.

Not cleaning the metal parts properly

can lead to a poor-quality joint.

Overheating the metal parts

which can damage the components or cause the solder to flow out of the joint.

Applying too much pressure while soldering

can displace the components or weaken the joint.

Using the wrong type of solder or flux

which can affect the quality of the joint.


Soldering is an important technique in the manufacturing industry, & with the right tools & techniques, it is possible to create strong & durable joints. At White Rock Manufacturing Solutions, we have years of experience in soldering & can provide high-quality soldering services for your business needs. Remember to clean the metal parts thoroughly, apply the right amount of flux, & use the correct temperature when soldering. Avoid common mistakes such as using too much pressure or solder, overheating the metal parts, & using the wrong type of solder or flux. By following these tips & techniques, you can produce strong & reliable soldered joints for your products.

Get a Quote Today!

Learn more about us. Read our story & meet our amazing team. 

Contact Us.

If you want to start a new project, we invite you to get in touch with us. 

Comments are closed.